RX220
Service Supplement
11
3
Safety notes
I
The following safety notes can also be found in the manual entitled
“Safety”.
This device complies with the relevant safety regulations for data processing
equipment.
V
CAUTION!
The actions described in this manual should only be performed by
service personnel.
Before operating the device
V
CAUTION!
●
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
●
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●
Transport the device only in its original packaging or in packaging
which protects it from knocks and jolts.
Installation and operation
V
CAUTION!
●
If the rack model is integrated in an installation that receives power
from an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type A connector.
●
The server automatically adjusts to a mains voltage between 100 V
and 240 V. Make sure that the local mains voltage is neither above nor
below this range.
