MYRICA P42-1AH / P42-2H / P50-2H
A26361-K1064-Z120-1-M119 edition 2
English - 25
With these functions you set the position and the synchronisation of the
picture display.
To set the picture display, first use the
Auto
function and correct the picture
display and, if necessary, then with the other functions.
These functions are only available when
PC
is selected as the signal
source.
H Position
With this function you set the horizontal picture
position.
V Position
With this function you set the vertical picture position.
Phase
With this function you fine-tune your display to
eliminate picture interference.
Geometry
(in PC mode only)
Auto
With this function you optimally set the picture display
automatically.
SOUND menu - sound settings
►
Press the MENU button to open the OSD menu.
►
Mark
the
SOUND
menu item with the
/
buttons.
►
Press the MENU button to activate the menu item.
The buttons available to you for setting the options are shown in the menu footer.
Balance
With this function you set the balance between the left and the right
loudspeaker.
Sound-Mode
With this function you activate the sound mode.
The bass level and frequency of the sound are automatically set to
optimum values depending on the sound mode.
Possible values:
Standard
,
Movie
,
Music
,
User
.
Spatial Effect
With this function you switch the Surround sound mode on or off.
Possible values:
On
,
Off
