27
SECTION 2
Ejecting a PC card
PC card eject/lock button
3
Lock the PC card.
Fully pull out the PC card eject/lock button, collapse it backward, and lock the PC card with the
fitting.
4
If the PC card is being installed for the first time, install any necessary driver.
Some PC cards require the installation of a driver. Check the manual supplied with each PC
card and install a driver if required.
A floppy disk or a CD may be required to install a driver.
5
Click the
icon (Safely Remove Hardware) in the lower right corner of the screen
(notification area where a clock is displayed), and make sure that the name of the PC card
inserted is displayed correctly.
-
If the name of the PC card is displayed, click any vacant area on the desktop. in the “Ejecting
a PC card” section, and insert the PC card again.
Critical Points
When you use a PC card attached with a cable, do not put anything heavy on, or apply a
shock to, the connector of the cable connected with the PC card, or it may damage the
equipment.
Critical Points
When you remove a PC card attached with a cable, do not pull the cable connected to the
PC card or it will result in failure.
When you remove a PC card, follow the procedure below or it will result in failure.
Some PC cards require shutting down when you remove them. Consult with the manual of
the PC card.
Laurel Sec 2 (021-29)
17/04/02, 9:48 AM
27