Switching the PC on and off
Preparation for use and operation
A26361-K619-Z100-1-7619
17
Switching on the PC
Ê
Switch the monitor on (see the Operating Manual for the monitor).
Ê
Switch the system unit on with the main switch at the rear of the system unit.
Ê
If the power-on indicator lights orange, press the ON/OFF switch at the front of the system unit.
The power-on indicator lights green and the PC is started.
i
If you have assigned the system password, you must enter this when requested to do so,
in order to start the operating system.
Switching off the PC
Your PC is equipped with a Save-to-RAM function. When it is switched off with the ON/OFF switch,
the system state is saved so that the last applications opened are available again very quickly after
switch-on.
Switching off PC with Save-to-RAM function
Ê
Briefly (<4 seconds) press the ON/OFF switch.
The system state is saved. The system unit switches into the "ready-to-operate" mode.
When the system unit is operated in the Save-to-RAM mode, the power-on indicator flashes
green/orange. The system unit uses a minimum of electricity.
Switching off PC completely
Ê
Shut down the operating system Windows properly in the
Start
menu via the
Quit
function.
Ê
Switch the system unit off with the main switch.
When the system unit is switched off completely the power-on indicator is dark after a few seconds.
The system unit no longer uses any power.
!
The main switch and the ON/OFF switch do not disconnect the system unit from the line
voltage. To disconnect the line voltage completely, remove the power plug from the
socket.
Ê
Switch the monitor off (see the Operating Manual for the monitor).