Preparation for use and operation
Connecting the PC to the line voltage
12
A26361-K619-Z100-1-7619
Connecting the monitor to the line voltage
Ê
Prepare the monitor as described in the Operating Manual for the monitor.
Ê
Plug the data cable of the monitor into the monitor port of the system unit.
1
2
Ê
Depending on the connector, plug the monitor power cable into either the system unit (1) or the
grounded power outlet (2).
!
You may only plug the monitor power cable into the monitor connector if the rated current
of the monitor is less than 1.5 A (230 V) or 3 A (115 V). The rated current for the monitor
is also given on the monitor itself and in the Operating Manual for the monitor.
Connecting the PC to the line voltage
Ê
Check the rated voltage.
!
The value shown or the value marked with an arrow must agree with the local line voltage:
115 = 100 V to 125 V
230 = 200 V to 240 V
