manualshive.com logo in svg

Fujitsu Siemens Computers ESPRIMO P, Руководство по эксплуатации, Страница: 26 / 68

Поделиться
Скачать
Fujitsu Siemens Computers ESPRIMO P Скачать руководство пользователя страница 26

Operation

 

Indicators provided by the device 

The indicators are on the front of the casing. Which indicators are available on your device depends 
on the configuration level you have selected. 

 

1 2

5

3
4

 

 

1 =  Hard disk indicator 
2 =  Power-on indicator 
3 =  Drive indicator, e.g. DVD 

4 =  SmartCard reader indicator (optional) 
5 =  Floppy disk indicator 

 

1 - Hard disk indicator 

The indicator lights up when the hard disk of the device is accessed. 

2 -  Power-on indicator 

– 

The indicator is green: 
The device is on. 

i

 

The display can also light up green if the device has been switched off by 
holding the ON/OFF switch (see "Troubleshooting and tips"). 

 

– 

The indicator lights orange: 
The device is ready-to-operate or in energy-saving mode. After being switched on with 
the power button, the device switches on or returns to the state it was in before the 
energy-saving mode. 

!

 

In the energy-saving mode the device may not be disconnected from the mains 
supply, as this may otherwise result in data loss. 

 

– 

The indicator does not light up: 
The device is disconnected from the power supply or is ready for operation. If your device 
is ready-to-operate it can be enabled with the ON/OFF switch. 

18

 

A26361-K1008-Z120-1-7619, edition 1 

Содержание ESPRIMO P





































































Отзывы:

Нет отзывов