Fujitsu Siemens Computers ESPRIMO P, Руководство по эксплуатации, Страница: 17 / 68

Preparing for use
On devices with monitor socket
1
2
2
► Depending on your device configuration level, plug the monitor power cable into either the
monitor socket (optional) of the device (1) or a grounded power outlet (2).
i
When you connect the monitor to the monitor socket of the device, it automatically
switches off as soon as the device switches off.
!
The monitor power cable may only be connected to the monitor socket of the device if the
monitor current consumption is smaller than 1.5 A with 230 V or 3 A with 115 V. The
values for the monitor current consumption can be found in the technical data on the
monitor or in the operating manual for the monitor.
On devices without monitor socket
► Plug the power cable of the monitor into a grounded mains outlet (2).
Connecting the mouse
Depending on the equipment level selected, your device will be supplied with a PS/2 mouse or a
USB mouse.
Connecting a PS/2 mouse
► Connect the PS/2 mouse to the PS/2 mouse port of the device.
Connecting USB mouse
► Connect the USB mouse to the USB port of the device.
i
If you do not attach a mouse at the PS/2 mouse port, you can disable the mouse controller
in the
BIOS Setup
in order to free the IRQ12 for a different application.
A26361-K1008-Z120-1-7619, edition 1 9