Fujitsu Siemens Computers AMILO Si 1848, Легкое руководство, Страница: 55 / 86

Connecting external devices
Before you connect or disconnect any devices from your notebook please read the safety
notes in the "Important notes" chapter.
!
Always read the documentation supplied with the device you wish to connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always hold the plug.
Follow the steps below in order, when connecting or disconnecting devices to your
notebook:
Connecting devices to notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the mains sockets.
3. Connect the cables for your external devices following the supplied instructions.
4. Plug all power cables into the mains sockets.
Disconnecting devices from notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the mains sockets.
3. Disconnect the cables for your external devices following the supplied instructions.
As your notebook has a metal surface, vibrations may occur if an external device is
connected to it with an unearthed 2-pin mains adapter. These vibrations will not impair the
functionality of your notebook or damage it in any way. Personal experience of this
phenomenon may differ, as the perception of vibrations is subjective. To avoid such
vibrations, connect the supplied 3-pin mains adapter to your notebook.
i
Some of the external devices require special drivers (see the operating system and
external device documentation).
10600736497, edition 3 45