13
16. Install the oil tray.
A.Align two feet of the oil tray with the
hole on the rectifier panel and insert
the oil tray into the hole,the direction
is shown in the right figure.
B.Push the oil tray into the slot.
Note:When removing the oil tray,push
one side out of the slot,and then push
the other side out of the slot.
15. Install the rectifier panel.
A. Put the rectifier panel on two rear hooking
brackets of the main unit.
B. Turn the rectifier panel horizontally, align it
with the le
�
and right ball catchers,and
push it forward towards the main unit.
Note: Ensure that the ball catchers in the
rectifier panel is completely clamped in
the clamp anchor. If it is not installed in
place, there may be a risk of falling.
Ins
talla
tion
14. Secure the filter with a fixing screw.
Hooking Bracket
Filter
Fixing Screw
Rectifier Panel
Ball Catch
