Cooker Hood Installation
10
Ins
talla
tion
Installation method
1. Remove the fixing screw attached
to the front side of the filter.
Remove the filter.
3. Install the recycling device assembly
(for recycling type).
Secure the exhaust box assembly with
4 ST4×8 flat head screws.
2. Remove the fan guard from the
4 mounting screws attached to
the fan guard.
Use the appropriate accessories for installation (see page 7).
Note
4. 5 pieces of ST5×50 wood screws
(installation size on page 9)
The duct cover fixing bracket and
the hanging bracket are fixed on the wall.
If you use a plastic expansion pipe, use a
Ø10mm drill bit to drill holes in the wall.
The hole diameter is Ø10mm and the depth
is 55mm or more.
Filter
Fixing Screw
ST4×8
Flat head screws
Recycling Device
ST5×50 wood screws
Duct Cover
Fixing Bracket
Hanging
Bracket
Fan Guard
Mounting Screws
Note
Recycling type
