Fujiiryoki HWP-77EN, Инструкция по эксплуатации

Страница: 16 / 76

16
Method of
mounting
Installation of main body
Install so that the main body is horizontal.
Do not install in an unstable place such as on a wobbling stand or inclined surface.
(The main body may drop or fall off, resulting in injury.)
Do not install in places described below.
(Deformation, discoloration, malfunction or failure may result.)
3ODFHZKHUHILUHLVXVHGRUQHDUREMHFWWKDWJHWVKRWƒ&RUKLJKHU
- On and near microwave oven, electromagnetic range, refrigerator
- Place subject to direct sunlight
- Place where oil adheres
- Outdoors or place subject to wind and rain
- Bathroom and place subject to water or steam
- Place which may freeze
Do not extend water outlet with commercially available hose. (Failure may be result.)
Do not connect other equipment to water supply and drain hoses.
(Water leakage or failure may be result.)
Do not block water outlet and do not bend, twist or crush hose.
(Appropriate pH value cannot be obtained, or water leakage or failure may result.)
Do not install on hot-water supply facility without check valve (backwater valve).
(Failure of hot-water supply facility may result.)
Do not install to water tap dedicated to hot water. (Failure may result.)
Prevent the main body from pressing the power cord, water supply hose, and
drain hose. (Water leakage or failure may result.)
Make sure
to observe
Prohibited
Place the salt case on the filter.
Installation of the salt case
Salt case
●
Filter
●
How to pull out the power cord, water supply hose and drain hose
Determine the direction of right or left for pulling out
the power cord, water supply cord and water drain hose
according to the installation position.
Front of main body
●
Power cord
●
Water supply hose
●
The water supply hose and drain hose can be routed from the base.
●
●
Drain hose