FujiFilm WP-FZX100, Руководство пользователя, Страница: 55 / 140

EN-23
SU18XX_case BL00654-100
ENGLISH
Maintenance
5
Coat the O-ring with the special grease.
To apply a uniformly thin layer of
silicone grease to the O-ring, squeeze
out about 5 mm (0.2 in.) length of
the grease provided with this product
from the tube into a clean plastic
bag (about 10 cm (3.9 in.) × 20 cm
(7.9 in.) in size) and then knead it
thoroughly. Put the O-ring into the
plastic bag and continue kneading
until the O-ring is completely covered
with grease. The plastic bag can be
used more than once if kept clean.
6
Install the front-side O-ring (white).
For correct installation, observe the
sticker (white) inside the waterproof
case.
Place the front-side O-ring on the
waterproof case beforehand to
confirm that the O-ring is not twisted.
If it is not twisted, make sure that
it is clean, with no foreign particles
embedded in it or dust stuck to it,
before installing it.
O-ring (white) O-ring (white)