FujiFilm WP-FZX100, Руководство пользователя, Страница: 42 / 140

EN-10
SU18XX_case BL00654-100
6
When all is well, use a clean fingertip to apply the special
silicone grease. And then spread it on the surface of the O-ring
until it is completely covered.
Only use the special silicone grease
provided.
After applying the grease, check that
there is no sand or other substances
attached to the O-ring.
7
Close the waterproof case.
➀
Close the waterproof case and
turn the open/close knob in the
direction of the “CLOSE” arrow to
seal it.
➁
Lock the open/close knob.
When closing the waterproof case,
take care not to catch your fingers or
palm in the waterproof case.
8
Dip the empty waterproof case into a water tank or a bathtub
and check for water leaks. For how to check it, see p.13.
If a water leak is detected …
➀
Immediately take the waterproof case out of the water and dry it on the
outside.
➁
Make sure that there are no cracks in the waterproof case body. Check
the O-ring for attached foreign particles, flaws, cracks, odd shape, or
twisting, and for any foreign particles in the O-ring groove.
➂
When all is well, start over from the procedure on p.8.
If you find something wrong with the waterproof case, immediately stop
using it and contact your FUJIFILM dealer.
Preliminary check of the case
O-ring