FujiFilm UA125x8BESM-S35, Руководство по эксплуатации

Страница: 46 / 84

-･12･-
Depending･on･matching･with･a･camera,･hunting･of･the･iris･movement･occurs.
If･the･iris･operation･continues･to･be･unstable･or･the･response･is･too･slow,･the･iris･can･be･adjusted･using･the･gain･
adjustment･trimmer･(RV2421)･on･the･MECCON･board.･･(･Refer･to･ “Teble･2” of Technical･Drawings）
For･the･iris･adjustment･method,･refer･to･the･detailed･user･manual.
The･detailed･user･manual･can･be･downloaded･from･our･website.
URL･https://www.fujifilm.com/support/optical_devices/tv_cine/manuals/
This lens incorporates a function that compensates for the change of the field angle caused by focusing.
This function is enabled when dip switch (SW3150) No. 2 on the MECCON board is set to
“
ON.
”
Note : Even when this function is set to
“
ON
”
using the dip switch, the function may be set to
“
OFF
”
using the
menu on the LCD panel. (refer to page 7
）
This function works when the lens is operated with a digital zoom rate demand unit and a digital or servo focus position
demand unit.
This lens incorporates the optical stabilizer function that optically compensates for the shakes of the lens and base
mount.
This function can be operated using the operation switches of the lens, external stabilizer controller, and either a zoom
rate demand unit or a focus position demand unit with a stabilizer control function.
For priorities and detailed descriptions on the operations of each controller, refer to the detailed user manual.
Note : ･
To use the stabilizer function for this product, connect the CN2100 jumper switch 2-3 on the MECCON board.
11.1 Stabilizer ON/OFF Control
11.1.1 Operation by Stabilizer Controller
When the optional stabilizer controller (EA-12A-xxxx) is connected to the connector for stabilizer control
⑮
of
this product, the stabilizer function of the lens can be controlled from the stabilizer controller. In addition to the
setting of the stabilizer ON/OFF control function, the stabilizing direction (H+V/V) can be set from the stabilizer
controller.
11.1.2 Operation by Lens Switch
When the stabilizer H+V/OFF/V select switch
㉘
on the lens of the switch lens main body is set either to
“
H+V
”
or
“
V,
”
the stabilizer function is activated. When the switch is set to
“
H+V,
”
it compensates for vibration
in both vertical and horizontal directions; while set to
“
V,
”
it compensates for vibration in only the vertical
direction. When it is set to
“
OFF,
”
the operation of the stabilizer function is stopped.
11.1.3 Operation by Focus Control Unit or Zoom Control Unit
The stabilizer function can be set to
“
ON
”
or
“
OFF
”
by means of either a zoom rate demand unit or focus
position demand unit that has the stabilizer control function, if such a unit is connected to the lens.
11.2 Selection of Stabilizing Characteristic
The stabilizing characteristic of the stabilizer function can be selected using the stabilizer HIGH/STD. select switch
on the lens or stabilizer controller.
・
HIGH mode
：
This mode is suitable for reducing shake while shooting in a stationary state.
・
STD mode
：
This mode is suitable for suppressing unnatural motion caused by the stabilizer control.
９. ADJUSTMENT OF IRIS AMPLIFIER
１０. BREATHING COMPENSATION TECHNOROGY(BCT)
１１. OPTICAL STABILIZER FUNCTION