FujiFilm MX-1200, Руководство пользователя

Страница: 14 / 43

27
2
26
TAKING PICTURES USING THE LCD MONITOR
4
Look at the image on the LCD monitor and point
the camera so that the subject is in roughly the
middle of the image.
●
!
If the image on the LCD monitor is difficult to see,
adjust the monitor brightness (
➡
P.21).
●
!
If the subject is not in the middle of the image, take
the picture using AE lock (
➡
P.68).
Take care to ensure that the lens, flash and
flash control sensor are not obscured by your
fingers or the strap.
Beep
6
To take the picture, press the shutter button
down fully without lifting your finger off it. The
camera beeps and takes the picture, and the
data is then recorded.
●
!
While the image data is being recorded, the
viewfinder indicator turns orange and you cannot
take pictures. Do not switch the camera off or open
the battery cover or slot cover during data recording.
●
!
The viewfinder lamp flashes orange while the flash is
charging.
●
!
Because the amount of image data recorded is not
fixed and varies depending on the subject (level of
image detail, etc.), the number of available shots
may not decrease after the image is recorded, or
may decrease by 2.
●
!
See P.74 for information on the warning displays.
5
●
!
The camera will not focus at distances of 70 cm or
less even when “
” is displayed.
When you press the shutter button down half
way and “
” appears on the LCD
monitor (the viewfinder indicator stops blinking
and remains green), exposure setting is
completed (AE lock
➡
P.68).
3