FujiFilm MX-1200, Руководство пользователя

Страница: 7 / 43

13
1
12
LOADING THE BATTERIES
1
Applicable Batteries
Use 4 AA-size alkaline, Ni-MH or Ni-Cd batteries.
Do not use different types of battery together.
Slide the battery cover in the direction of the
arrow and open the cover.
●
!
Do not apply excessive force to the battery cover.
●
!
Always switch the camera off when replacing the
batteries. If the camera is left switched on, the
camera settings may revert to the factory default
settings.
●
!
Install replacement batteries within 5 minutes since
the camera settings are only retained for 5 minutes
once the batteries are removed.
●
!
Do not use new and used batteries together.
ATTACHING THE STRAP
Pass the loop of thin cord on the end of the strap
through the strap mount. Then pass the other end of the strap through the
loop of thin cord and pull the strap tight.
1 2
◆
Important Battery Information
◆
●
It is a characteristic of alkaline batteries in
particular that the life of the battery is shorter
at low temperatures (+10°C or below).
●
Do not use lithium or manganese batteries in
your MX-1200 because the heat generated
by the batteries could damage the camera.
1
Getting Ready