FujiFilm instax mini70, Руководство пользователя

Страница: 20 / 154

20
EN
Problems Possible Causes Solutions
The film pack won’t load
into your camera, or won’t
load into your camera
smoothly.
1
The film pack is not for your
camera.
2
You are not loading the film
pack correctly.
1
Use FUJIFILM INSTAX mini film only. (No other films can
be used.)
2
Match the yellow line on the film pack with the yellow positioning
mark in your camera. Follow the INSTAX mini film pack instructions.
The film cover cannot be
ejected. ●
The battery power is low.
●
Replace both batteries with new batteries and load the
film pack again.
The LCD looks black. ●
The camera is too hot for
operation.
●
Put the camera in a cool place. The LCD should return to
normal once it cools down.
The battery becomes
exhausted quickly.
●
The batteries are not the same
type.
●
Replace both batteries with new CR2 lithium batteries of
the same brand/type.
Printed pictures
Problems Possible Causes Solutions
Part or whole finished
print is white.
●
The back cover is opened
before you have used up the
film.
●
Do not open the back cover until you have used up
the film; otherwise, the rest of the film is exposed and
ruined for use.
The finished print looks
over exposed. (White in
color)
1
The ambient temperature is
low (below +5°C/+41°F).
2
The AE light sensor window
or flash sensor window is
blocked.
1
Before taking pictures, place your camera in a warm
place to bring it to room temperature.
2
Be careful not to block the AE light sensor or flash sensor
window, or so that nothing blocks it.
BO-7_6lang.indb 20 2015/7/14 8:47:59