FujiFilm FUJINON XA22x7BES-D8, Руководство по эксплуатации

Страница: 38 / 76

EFP-58(B)_ E
- 10 -
◇
６
ABOUT FUNCTION ＆ MODE SELECT SWITCHES
Function & mode select switches are incorporated in this lens. These switches can be seen by removing the round
rectangular rubber cap on the rear side of the lens.
1-① Quickzoom ON/OFF Switch
This switch changes the function of the quickzoom to ON and OFF. The quickzoom operation can be performed
using a zoom rate demand unit (Ex. ERD-10A-D01). Refer to paragraph “ About Quickzoom Operation ” on
page 12.
1-② VTR → Quickzoom Select Switch
This switch changes the function of the VTR switch, on a zoom rate demand unit (Ex. ERD-10A-D05A) linked
to the lens, to that of the quickzoom or the auto cruising zoom switch. Refer to paragraph “ About Setting of
VTR Switch and Return Switch ” on page 12.
1-③ Return → Quickzoom Select Switch
This switch changes the function of the return switch, on a zoom rate demand unit (Ex. ERD-10A-D05A) linked
to the lens, to that of the quickzoom or the auto cruising zoom switch. Refer to paragraph “ About Setting of
VTR Switch and Return Switch ” on page 12.
1-④ Analog Zoom Demand
Zoom Mode Function ON/OFF Switch
In a zoom operation with an analog zoom rate control unit (Ex. ERD-T21), the zoom mode function (function of
selecting the characteristics of
“
Zoom Speed vs Zoom Control Signal
”
) can be switched to ON and OFF.
FUNCTION ＆ MODE SELECT SWITCHES
QUICKZOOM ON/OFF SWITCH
VTR → QUICKZOOM SELECT SWITCH
ANALOG ZOOM DEMAND
ZOOM MODE FUNCTION ON/OFF SWITCH
RETURN → QUICKZOOM SELECT SWITCH
1-①
1-②
1-③
1-④
FIELD ANGEL COMP ON/OFF SWITCH
FUNCTION SWITCH
IRIS COMP ON/OFF SWITCH
AUTO CRUISING ZOOM ON/OFF SWITCH
1-⑤
1-⑥
1-⑦
1-⑧
CAMERA COMMUNICATION ON/OFF SWITCH
ZOOM MOTOR ON/OFF SWITCH
FOCUS MOTOR ON/OFF SWITCH
IRIS MOTOR ON/OFF SWITCH
2-①
2-②
2-③
2-④
ZOOM MODE SELECT SWITCH
4
1
2
3
ON
1
2 3 4 5
6
78
9
0
1
2
3
4
5
6
7
8
ON
REAR VIEW OF LENS
The illustration shows the positions set at the factory.