This setting sets the contrast for photographed images to the
standard level.
Use this setting for images that will undergo image processing
for use in commercial printing. This setting provides a higher
level of contrast than the “STD” setting.
This setting specifies a lower contrast than the “STD” setting.
Use this setting for images that will undergo image processing
for use in commercial printing.
STD
(default)
HARD
ORG
Display
Name
Description
46
■
Use the procedure below to set the contrast when images are shot.
1
Press the “FUNC” button twice.
2
The
icon for the tone setting appears on the rear
display panel. Press function button [2].
With the tone set to “STD”
• The display changes in the cycle shown below each time function button
[2] is pressed.
• The same settings can also be selected by holding down function button
[2] and pressing “
a
” on the 4-direction button. You can select settings in
the reverse order by holding down function button [2] and pressing “
b
” on
the 4-direction button.
ORG
STD
HARD
Setting the Tone
• If you want to view or print the image data directly, do not select “ORG”.
Rear Display Panel