Display
Name
Description
STD
(default)
HIGH
ORG
B/W
This setting sets the standard color density.
This setting provides a higher color density than the “STD”
setting.
This setting specifies a lower color density than the “STD”
setting. Use this setting for images that will undergo image
processing for use in commercial printing.
This setting converts the colors in the photographed image to
black and white.
45
2
Setting the Color
■
Use the procedure below to set the density of the color used when
images are shot.
1
Press the “FUNC” button twice.
2
The
icon for the color setting appears on the rear
display panel. Press function button [1].
With the color set to “STD”
• The display changes in the cycle shown below each time function button
[1] is pressed.
• The same settings can also be selected by holding down function button
[1] and pressing “
a
” on the 4-direction button. You can select settings in
the reverse order by holding down function button [1] and pressing “
b
” on
the 4-direction button.
B/W
ORG
STD
HIGH
• If you want to view or print the image data directly, do not select “ORG”.
Rear Display Panel
