54
IR Communication
Still pictures can be copied from the camera to any device that supports high-speed infrared or
IrSimple, including the optional FinePix REAL 3D V1 digital viewer. The camera can receive still pictures
from devices that support high-speed infrared or IrSimpleShot™ (IRSS™). Before sharing pictures, match
the
M
IR COMMUNICATION
option in the camera setup menu to the infrared transmission type used
by the other device (pg. 81). For details, see the manual provided with the device.
To share pictures, place the camera about 5 to 20 cm from the other device with
the infrared ports pointing directly at each other. The ports should be at no more
than a 15 ° angle. Be sure both devices are on.
Maximum angle: approximately 15 °
3
Caution
Make sure that there are no obstacles between the two devices and that the infrared ports are correctly aligned
and are not in direct sunlight or directly under a fl uorescent light. Remote controls and other infrared devices and
equipment that generates electrical noise may interfere with transmission.
2
Tips
• For information on supported infrared devices, consult the compatibility information for this camera at the fol-
lowing website:
http://fujifilm.com/products/digital_cameras/support/ir.html
.
•
C
images can only be transmitted to supported devices. Play images back in
D
before transmitting them to
other devices.
