59
Co
n
n
e
c
ti
o
n
s
Viewing Pictures on a Computer
C
Cautions
• If a memory card containing a large number of
images is inserted, there may be a delay before the
software starts and you may be unable to import or
save images. Use a memory card reader to transfer
pictures.
• Make sure that the computer does not display a
message stating that copying is in progress and that
the indicator lamp is out before turning the camera
off or disconnecting the USB cable (if the number of
images copied is very large, the indicator lamp may
remain lit after the message has cleared from the
computer display). Failure to observe this precaution
could result in loss of data or damage to internal
memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• In some cases, it may not be possible to access
pictures saved to a network server using
the supplied software in the same way as on a
standalone computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
Disconnecting the Camera
After confirming that the indicator lamp is out,
follow the on-screen instructions to turn the camera
off and disconnect the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no
longer required or before beginning reinstallation.
After quitting the software and disconnecting
the camera, drag the “FinePixViewer” folder from
“Applications” into the Trash and select
Empty Trash
in the
Finder
menu (Macintosh), or open the control
panel and use “Programs and Features” (Windows 7/
Windows Vista) or “Add or Remove Programs”
(Windows XP) to uninstall MyFinePix Studio. Under
Windows, one or more confirmation dialogs may be
displayed; read the contents carefully before clicking
OK
.
