68
Using the light source for which you want to set
the white balance, hold a sheet of white paper
so that it fills the entire screen.
When you press the “
&^*
/
!
” button, a measurement
is taken and the white balance is set.
If “
œ
” or “
§
” is displayed, the white
balance was not measured at the correct
exposure. Reset the white balance.
To use the white balance set previously,
press the “MENU/OK” button without
pressing the “
&^*
/
!
” button.
●
!
The white balance setting does not affect the image
shown on the screen.
●
!
After you take the picture, you should check the
“Color (White Balance)” setting for the image.
• Set “IMAGE DISPLAY” in the SET–UP menu to
“PREVIEW” (
➡
P.98).
• Set the Mode switch to “
2
” (
➡
P.33).
◆
Example
◆
You can deliberately change the white
balance for a photographed image by using
colored paper instead of white paper.
2
3
E
SETTING THE WHITE BALANCE
PHOTOGRAPHY MENU