background image

116

Notes on the Power Supply

AC Power Adapter

Always use the AC-5VS/AC-5VH AC Power Adapter
with the FinePix6900 ZOOM Camera.
The use of an AC power adapter other than the AC-5VS/
AC-5VH could result in damage to your FinePix6900
ZOOM Digital Camera.

This AC power adapter is designed exclusively for
indoor use.

Plug the connection cord plug securely into the DC
input terminal of the FUJIFILM Digital camera.

Turn off the power switch of the FUJIFILM Digital
camera before disconnecting the connection cord
from the FUJIFILM Digital camera’s DC input
terminal. To disconnect, take hold of the plug and pull
it out (do not disconnect it by pulling on the cord).

Do not use this AC power adapter with any device
except the specified device.

During use, this AC power adapter will become hot to
touch, but this is normal.

Do not disassemble the AC power adapter. Doing so
could be dangerous.

Do not use this device in a place with high
temperature and high humidity.

Do not drop or subject this device to strong shocks.

This device may emit a humming noise, but this is
normal.

If used near a radio, this device may cause static, so
play the radio in a distant place.

Very occasionally, DC output will be prevented by the
operation of the internal protection circuit. In this event, unplug
the AC-5VS/AC-5VH from the power socket for a few
moments and then plug it in again. This will restore DC output.

Specifications (AC-5VS/AC-5VH)

Power Supply

AC 100V to 240V, 50/60Hz

Rated Input Capacity 12W (U.S.A. and Canada)

0.15A to 0.24A (other countries)

Rated Output

DC 5.0V 1.5A (U.S.A. and Canada)
DC 5.0V 2.0A (other countries)

Temperature During Use 0°C to +40°C (+32°F to +104°F)

(U.S.A. and Canada)
0°C to +45°C (other countries)

Storage Temperature -10°C to +70°C (+14°F to +158°F)
Dimensions (MAX.)

47 mm 

×

20 mm 

×

72 mm

(1.9 in. 

×

0.8 in. 

×

2.8 in.)

(W 

×

×

D) (U.S.A. and Canada)

49 mm 

×

40 mm 

×

65 mm

(W 

×

×

D) (U.K.)

49 mm 

×

31 mm 

×

65 mm

(W 

×

×

D) (other countries)

Mass (Weight)

Approx. 120 g (4.2 oz.) (U.S.A. and
Canada)
Approx. 200 g (U.K.)
Approx. 180 g (other countries)

Connection Cord Length Approx. 2 m (6.6 ft.)

Please note that specifications and characteristics are
subject to change without notice.

Содержание FINEPIX 6900 ZOOM





































































































































Отзывы: