Getting acquainted
○
1
Power on/off and volume adjuster
Turn the knob clockwise then the power will turn on, it can adjust the
volume after turn on. Turn the knob counter-clockwise, it will turn off
the power.
○
2
LED light
When transmit it turn red, receive it turn green. The red light glitter
when in low battery.
○
3
Turn the coder
Turn the coder to choose the channel, when adjusting the squelch, it
also can use for other function.
○
4
PTT
Press the PTT button then you can speak to transmit.
○
5
MONI
Press the MONI button to monitor the current channel.
○
6
LAMP
Press the lamp button the turn on or turn off the lamp
○
7
CH2F
Press this button can switch from frequency mode to channel mode,
using with the FUNC button can lock the transceiver and inverse
frequency function.
○
8
FUNC
Press or hold this button can open the other function.
○
9
SCAN
Press this button to start or stop scanning, besides it also use with the
FUNC button to add or delete the scanned channel.
○
10
LOW
Press this button can switch the current channel power output, use
with the FUNC can adjust the squelch and the keypad tone.
○
11
KEYPAD
When input the frequency, it can be used directly.
