Fuji Xerox DocuPrint CP105 b, Руководство пользователя

Страница: 103 / 185

Using the Operator Panel 102
Resetting to Factory Defaults
After Initializing the Non-Volatile Memory (NVM) and rebooting the printer, all the menu parameters or
data are reset to their factory default values.
1
Turn off the printer.
2
Open the rear door.
3
While holding down the ( Start ) button and the ( Cancel Job ) button at the same time, turn
on the printer.
4
After the ( Start ), ( Energy Saver ), and ( Error ) indicators go out, release the ( Start )
button and ( Cancel Job ) button.
5
Close the rear door.
The printer starts initializing the NVM.
IMPORTANT:
• Never attempt to turn off the printer. The printer will cease to function.
The printer restarts automatically to apply the settings and prints the Printer Settings and Panel
Settings pages.
6
Check if the factory settings are restored by referring to the Printer Settings and Panel Settings
pages.