Fuji Electric SPF Series Скачать руководство пользователя страница 141

Страница: 141 / 151

3-4

Section 3 System Definition

3-3 Parameters for Main Unit

3-3-1 CPU running definition

The CPU running definition includes the following six setting items: “Watchdog timer setting”, “Running specification at power on”,

“Battery less run”, “Constant scanning setting”, “I/O status latch function”, and “LED display at built-in flash memory un-match”.

(1) Watch dog timer setting

The watchdog timer monitors default task execution time. If the execution time of the default task exceeds the value set here,

“application WDT error (%MX10.38.0)” is set ON and the main unit stops operation.

Watchdog timer can be set in the range from 2ms to 4095ms. The default setting is 4095ms.

(2) Running specification at power on

“RUN=Run/TERM=Run” (the mode that starts operation when the power is turned on) is selected for this parameter (fixed).

(3) Battery less run

When “Battery less run” is ON, the main unit always initializes the data memory before starting operation. No memory backup

error (%MX10.9.15) is detected. The default setting is OFF.

(4) Constant scanning setting

Constant scanning is the function that sets the default task scan period and executes program at a given interval (0 to 255ms).

With this function, you can keep the interval to control external equipment at a constant value that does not depend on program

execution time and thus implement a control system that is small in the deviation of I/O response time.

Notes:

1) The constant scanning function does not reduce PLC scan time. Therefore, do not set a time value that is smaller than

ordinary scan time. If scan time exceeds the set value of constant scanning, ordinary scan is performed.

2) If the constant scanning and fixed cycle task are used at the same time, the periodic task is not started within the period for

time adjustment in the constant scan time. Thus, the start timing of periodic task may vary.

(5) I/O status latch function

With this function, you can latch I/O status while the main unit stops running.

For ordinary operation, all outputs are set OFF and all inputs are refreshed when the main unit stops.

If “Effective” is selected for “I/O status latch function”, I/O status is latched when operation is stopped. If operation is resumed

without turning OFF the power supply to the main unit, operation is resumed from the previous condition.

* This parameter can be used as a simplified sampling trace function to monitor the status of all inputs and outputs in case

of a

trouble by making a program that turns ON the fatal fault relay if the fault occurs in an external input switch, the troubles of

which are difficult to reproduce.

(6) LED display at built-in flash memory un-match

This parameter is used to determine whether or not to display on LED the mismatch in content between built-in flash memory

and RAM. Default is “Display” (display the mismatch on the LED). When “Not display” is selected, MEM LED does not blink even

in case of mismatch between the built-in flash memory and the RAM.

Default

task

Constant scan time

Operation execution

utput

sin

put

cessi

e a

ust

Sca

n e

ssi

Operation execution

utput

sin

put

cessi

e a

ust

Sca

n e

ssi

utput

sin

put

cessi

Sca

n e

ssi

Default task execution time

Default task execution period

Constant scan time

Содержание SPF Series
























































































































































Результаты поиска

Содержание SPF Series

Отзывы:

Бренды по названию

Популярные бренды

Fuji Electric SPF Series, Руководство пользователя

Результаты поиска

Содержание SPF Series

Отзывы:

Бренды по названию

Популярные бренды