22
INP-TN5A1634-E
3
The “PUM loader – PUM Parameters Support” screen appears (P.25).
Read the parameter set value out from the module-type temperature controller of the St. No. that was checked in the box.
■To cancel reading
Press the [Esc] key on the keyboard to cancel reading.
Note
•
Approximately 20 seconds are required to read the parameter settings per module-type temperature controller. Do not perform
other communication operations while the settings are read.
•
“Offline: STNo.” is displayed in (1) and a bar indicating progress status is displayed in (2) while communication is carried out.
“Offline: ” is displayed in (1) and nothing is displayed in (2) when communication is not carried out.
(2)
(1)
