Fuji Electric OPC-PRT, Инструкция по эксплуатации

Страница: 48 / 116

47
6.4.4 XTPro HMI-Based Implementation
A representative implementation based upon a stand-alone HMI client is detailed in Figure 36. In this
scenario, the client application is developed by using tools provided by the HMI manufacturer, and is
hosted independently of the actual server device.
6.4.5 XTPro Supported Commands
For a summary of XTPro commands, refer to Table 18.
Table 18: Supported XTPro Commands
Command Supported Notes
noop Yes -
vzn
Yes Supports XTPro specification version 1
id Yes -
read_data
Yes “reference” is the inverter’s function code (e.g. “F07” for
acceleration time #1), while “data_value” is a 16-bit hexadecimal
value (e.g. “1F4” for a decimal value of 500)
write_data
Yes
load_file
Yes
The absolute file path must start with a forward slash ‘/’
store_file Yes
reinit
No
Reinitializes only the configurable drivers and services (does not
perform a complete device soft reboot)
auth Yes Authorization is not required
cov Yes COV notification messages are sent every 200ms
Notes
• Two simultaneous XTPro connections are available.
Server
Device
Content is loaded
onto HMI device
2
XML socket (port 843)
<xreq>
<reMd_dMtM>
<ref>Pr_2<Cref>
<CreMd_dMtM>
<Cxreq>
HMI content
executes and
establishes
XML socket
3
XML socket (port 843)
<xresp>
<reMd_dMtM>
<ref>Pr_2<Cref>
<vMl>123<CvMl>
:
<Cxresp>
6
trogrammer authors
HMI (client) content
1
Client initiates XTtro
requests
4
Server responds to
client’s requests
5
XT
tr
o
Se
rv
er
Figure 36: HMI-Based Implementation