Fuji Electric NA0AW06-MR, Руководство пользователя

Страница: 29 / 57

2-20
Section 2 Specifications
Status indication LED Status Specification
PWR of analog input/output unit ON (red) While 5V DC power is normally supplied.
(2) Functions
1) Status indication LED
2) Terminal block
These are terminals for 24V DC power supply to operate the analog unit and analog input signal.
* For the wiring method, see “2-4 Wiring.”
3) JP1: Digital value range selection
This jumper pin is used to set the digital value range for analog output (upper side) and analog input (lower side)
U B
Analog output
Analog input
U B
Analog output
Analog input
4) JPA and 5) JPB: Analog output range selection
U B
5V
10
V
U B
5V
10
V
U B
5V
10
V
U B
5V
10
V
U B
5V
10
V
U B
5V
10
V
U B
5V
10
V
U B
5V
10
V
V
I
V
I
* When handling the setting pins on the printed circuit board, be sure to turn OFF the unit power. Securely mount them by using
tweezers.
Digital value range JP1 setting
-8192 to 8191
0 to 16383
Signal range JPA setting JPB setting
0 to 10V
-10 to 10V
0 to 5V
-5 to 5V
0 to 20mA
-20 to 20mA
0 to 10mA
-10 to 10mA