Fuji Electric MONITOUCH X1 Series, Технические характеристики

Страница: 48 / 180

3.4 Battery
3-7
1
2
3
4
5
6
7
8
9
10
3.4 Battery
3.4.1 Role of the Battery
The battery is used for backing up time data and BIOS settings (retention during power outage). The service life of the battery is about 3
years from the date of manufacture.
3.4.2 Battery Replacement
Replacement batteries are available.
* Commercially available batteries cannot be used.
Cautions on handling batteries
Lithium batteries contain combustible material such as lithium and organic solvents. Mishandling may cause heat, explosion, or ignition
resulting in fire or injury. To prevent accidents, pay attention to the following cautions when handling lithium batteries.
• Be sure to turn off the X1 series unit power and then replace the battery.
• Only experts with knowledge of battery replacement, Hakko Electronics personnel, or a person designated by Hakko Electronics are
authorized to perform battery replacement.
• Be sure to discharge static electricity from your body before performing battery replacement.
• Use the designated battery for replacement.
• Rough handling of the battery may cause fire or chemical burns.
• Observe local and governmental regulations when disposing of waste batteries.
• Keep batteries out of reach of children. (If swallowed, immediately consult a doctor.)
• If a battery leaks or smells, leaking battery electrolyte may ignite. Keep away from heat or flame.
• Transportation of batteries containing lithium metal must observe the relevant transport regulations.
Refer to “3.4.5 Cautions on Transport” page 3-9 .
A battery is already installed upon delivery.
Name Model Details
X1 replacement battery X1-BT
• Coin-type lithium primary cell 1 pce
• Instruction manual
• Replacement date sticker 1 pce
• The battery has polarity. Make sure to insert the battery in the correct orientation. Inserting the battery in the wrong
orientation may cause the battery to burst or ignite.
• Do not carry or store the replacement battery together with metal objects. Short-circuiting of the electrods may reduce
battery capacity or cause the battery to burst or ignite.
• Do not disassemble, incinerate, or heat batteries.
• Never attempt to recharge batteries.