Preface
Thank you for purchasing our Copy Adapter "CPAD-C1A."
The Copy Adapter can copy and set function codes and their data stored in FRENIC-Mini series of inverters into other ones while the inverters are in
a stop state.
Connecting the Copy Adapter to the connector provided for an RS485 communications card (option) on the inverter allows you to copy (by reading
data in the inverters and writing them into other ones), set, and monitor function codes and their data.
The Copy Adapter can store and manage up to 10 function code data blocks copied from 10 inverters.
This manual describes how to connect and remove the Copy Adapter and the "data copying," but none of other keypad functions. Note that the Copy
Adapter does not allow you to control the inverter for running, stopping or other any operations except above mentioned. For other functions that are
common to the built-in keypad, refer to the FRENIC-Mini Instruction Manual (INR-SI47-1205-E), Chapter 3.
Before installing and using the Copy Adapter, read through this manual in conjunction with the FRENIC-Mini Instruction Manual and make yourself
familiar with its proper use. Improper handling might result in incorrect operation, a short life, or even a failure of this product as well as the motor.
Related Publications
Listed below are other publications on the FRENIC-Mini to be consulted in conjunction with this manual as necessary.
• FRENIC-Mini User’s Manual
(MEH446)
• FRENIC-Mini Instruction Manual
(INR-SI47-1205-E)
The materials are subject to change without notice. Be sure to obtain the latest editions for use.
Safety precautions
Read this manual thoroughly before proceeding with installation, connections (wiring), operation, or maintenance and inspection. Ensure you have
sound knowledge of the device and familiarize yourself with all safety information and precautions before proceeding to operate the inverter.
Safety precautions are classified into the following two categories in this manual.
Failure to heed the information indicated by this symbol may lead to dangerous conditions, possibly resulting in
death or serious bodily injuries.
Failure to heed the information indicated by this symbol may lead to dangerous conditions, possibly resulting in
minor or light bodily injuries and/or substantial property damage.
Failure to heed the information contained under the CAUTION title can also result in serious consequences. These safety precautions are of utmost
importance and must be observed at all times.
Operation
• Turn on the inverter power after connecting the cable connector of the copy adapter into the inverter’s connector.
• Do not unplug the cable connector while the power is applied.
• Do not touch the copy adapter with wet hands.
Doing so could cause electric shock.
• If you set the function codes wrongly or without completely understanding the instruction manuals and the FRENIC-Mini User's Manual, the
motor may rotate with a torque or at a speed not permitted for the machine.
An accident or injuries could occur.
• Do not touch the inverter terminals while the power is applied to the inverter even if the inverter stops.
Doing so could cause electric shock.
i
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
