Chapter 3 OPERATION USING THE COPY ADAPTER
3.1
Familiarizing Yourself with the Copy Adapter
The copy adapter is composed of a
4-digit, 7-segment LED monitor, an
LED block consisting of 5 LEDs, and
6 keys as shown in Figure 3.1.
Figure 3.1 Overview of Copy Adapter
STOP key
LED
indicators
DOWN key
UP key
FUNCTION
/DATA key
Function code
data block No.
key
7-segment LED monitor
PROGRAM
/RESET key
Table 3.1 Names and Functions of Various Parts of Copy Adapter
Item
Monitor,
LED Indicators
and Keys
Function Remarks
LED
Monitor
7-segment
LED monitor
Displays information depending on the operation mode*.
key
Switches the operation mode*.
key
Switches the information displayed, fixes the function code data,
or switches the alarm information displayed, depending on the
operation mode.
This key also enables or disables the data protection function.
key
key
These keys are used to select the setting items displayed on the
LED monitor and change the function code data.
key
This key is used to select the function code data block number.
Operation
Keys
key
Out of use for the copy adapter.
(Pressing this key cannot stop the motor in running.)
RUN LED
Lights when any run command is given to the inverter.
KEYPAD
CONTROL LED
Lights when the keypad is specified as a run command source.
*Operation mode:
• Running mode
• Programming mode
• Alarm mode
kW, A, Hz, r/min, m/min:
These three LEDs together as a group indicate the unit of the
quantity being monitored.
See Table 3.2.
LED
Indicators
Unit/Mode LEDs
PRG
MODE
Two LEDs (right and left) light in Programming mode.
For the operation mode of the FRENIC-Mini and its operating procedures, refer to the FRENIC-Mini Instruction Manual (INR-SI47-1205-E),
Chapter 3 "OPERATION USING THE KEYPAD."
Table 3.2 lists the combinations of the three LEDs on the LED block, which indicate what is displayed on the 7-segment LED monitor.
Table 3.2 Definition of LED Indication on the LED Block
Indication on LED
Unit
Description
Hz
A
kW Hz
Frequency
Hz
A
kW A
Output
current
Hz
A
kW kW
Input
power
Hz
A
kW
r/min
Load shaft speed
Hz
A
kW m/min
Line
speed
Hz
A
kW -
Programming
mode
Hz
A
kW
-
Events other than above
on
，
off
For details, refer to the FRENIC-Mini Instruction Manual (INR-SI47-1205-E), Chapter 3, Section 3.2.1 " Running mode [1] Monitor the running status."
3-1
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
