20
5.4 (7) Setting of measurement display specifications
Description
Select measured value from the following.
1. Setting of measurement display 1st line
Select any one from the following 7 types for the 1st line display.
F : TOTAL
: Forward integral value
R : TOTAL
: Reverse integral value
TOTAL DIFF
: Forward/reverse difference between integral values
F : TOTAL PULSE : Forward integral pulse counter
R : TOTAL PULSE : Reverse integral pulse counter
FLOW VELOCITY : Instantaneous flow velocity [m/s]
RANGE %
: Ratio of analog output to range
2. Setting of decimal measurement display on 2nd line
On the second display is instantaneous flow rate displayed.
Select one from the following 12 units of flow rate.
l/s, l/m l/h, Ml/d, m
3
/s, m
3
/m, m
3
/h, Mm
3
/d
BBL/s, BBL/m, BBL/h, MBBL/d
3. Setting of decimal point position of instantaneous flow rate display
Setting of digit display after the decimal point is available.
Select any one from the following.
Position of decimal point (digit)
Range of data display
00000000.
:
-99999999. to
0.
to
99999999.
0000000.0
:
-9999999.9 to
0.0
to
9999999.9
000000.00
:
-999999.99 to
0.00
to
999999.99
00000.000
:
-99999.999 to
0.000
to
99999.999
0000.0000
:
-9999.9999 to
0.0000
to
9999.9999
000.00000
:
-999.99999 to
0.00000
to
999.99999
00.000000
:
-99.999999 to 0.000000
to
99.999999
0.0000000
:
-9.9999999 to 0.0000000
to
9.9999999
Display of integral value
1. Display of forward/reverse integral values
Overflow mark
When the integral value exceeds the overflow mark.
Overflow times
0 to 9, # (exceeding 9)
Integral value
0 to 9999999
#
2. Display of forward/reverse difference between integral values
Difference of integrated value = forward integral value - reverse integral value.
Note : If any of integral values in the forward and reverse directions exceeds the over
flow mark, ####### is displayed.
(metric system)
}