MT5F37311
1. Scope of Application
© Fuji Electric Co., Ltd. All rights reserved.
This manual explains how to mount and use the M653 packaging products safely.
This mounting instruction is available only for the following modules.
・
6MBI800XV-075V-01
In handling this IGBT module, strictly observe the contents described in "Warnings" and "Caution" of
the specification sheet in addition to the contents described in this manual.
1
For reference, the mounting sequence of the IGBT module and PCB is shown below.
(1) Align the PCB with the IGBT module and mount it (Two guide pins will support this process).
(2) Fix the PCB on the IGBT module by screws.
(3) Solder the PCB holes and control terminals.
(4) Fasten the IGBT modules to the equipment with screws.
(5) Connect the main terminals of the IGBT module to busbar, capacitor, etc.
Since the PCB tolerances depend on the PCB manufacturing process and are produced with the dime
nsions unique to the customer, typical PCB sizes and tolerances cannot be recommended. However, f
or reference, the evaluation board size and hole size of Fuji Electric are shown in Figure 1. This is a ref
erence value, so finally confirm it sufficiently by the customer.
2. Mounting Sequence
3. PCB Reference Specification
