FuelTech FTINJECTOR, Руководство пользователя

Страница: 16 / 17

17
EN
6.5 Oxygenated fuels usually include
• MTBE / ETBE
• Nitropropane / Nitromethane
• Methanol
• Ethanol
c. Spray the inlet and outlet with penetrating oil and cap both ends with the
supplied rubber caps
d. Store your injectors in a plastic closable bag
If you do not use an oxygenated fuel simply seal your fuel system off by capping
the breather and keep the fuel cell or tank filled to the top.
Do not attempt to disassemble the product or to remove or replace any of its
components. Any attempt to do so could damage the product and will void
the product warranty. FuelTech will not service or replace any injector that has
been opened or where attempts to open are visible. Failure to heed any of the
warnings or precautions described in this manual may cause engine damage
and will void this product warranty.
6.4 Off season maintenance without removing injectors
In the absence of an injector cleaning and lubrication machine, simple and safe
maintenance can be performed.
a. Remove the fuel rail
b. Spay penetrating oil on the injectors
c. Turn on ignition and go to “Output Test” in FTManager software, pulse the
injector sprayed with penetrating oil. Repeat this procedure for all injectors
d. Put penetrating oil one more time in the injectors
e. Assemble the fuel rail
This procedure is necessary of the vehicle sitting for more than 3 weeks
without running.