Fuel LB 300, Руководство пользователя

Страница: 37 / 64

37
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
•
NEVER operate this treadmill without reading and completely understanding the instructions for
use and the safety instructions.
•
Keep children and pets away from the machine at all times. DO NOT leave children unattended in
the same room with the machine.
•
Understand that changes in speed and incline do not occur immediately. Set your desired speed
on the computer console and release the adjustment key. The computer will change the speed
gradually only.
•
NEVER mount or dismount the treadmill while the belt is moving. Fitness treadmills start with at
a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on
the belt during slow acceleration is proper after you have learned to operate the unit.
•
ALWAYS hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
•
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any
appliance with a large motor, the GFCI will trip often. Route the power cord away from any
moving part of the treadmill including the elevation mechanism and transport wheels.
•
Do not attempt any servicing or adjustments other than those described in this manual. All else
must be left to trained service personnel familiar with electro-mechanical equipment and
authorized under the laws of the country in question to carry out maintenance and repair work.
•
NEVER remove any cover without first disconnecting the power supply.
THE SAFETY KEY
This device is equipped with a safety key (C20). It is a simple design that should be used at all
times. It is for your safety should you fall or move too far back on the tread-belt. Pulling the safety
tether cord will stop tread-belt movement.
Use:
1.
Place the key into position on the computer console top. Your treadmill will not start and
operate without this step. Removing the key after your exercise also protects from
unauthorized use.
2.
Fasten the plastic clip onto your clothing (e.g. on the waistband) securely. Note : The clip
should be attached securely to make sure it does not come off accidentally. Anytime the key is
pulled off the computer console, the treadbelt will stop with delay.
“---” appears on the display
and a buzzer sound can be heard. Turn off the device, place the safety key back on its position
and switch the device on again and press START.
3.
If for any reason you feel unstable on the moving belt, immediately step off of the belt and onto
the step rails while holding the handrails for support. You can then step off the treadmill safely.
We recommend to remove the safety key after each exercise and store it in a
safe place.