Fuel LB 300, Руководство пользователя

Страница: 35 / 64

35
IMPORTANT SAFETY INSTRUCTIONS
This device is designed for optimum safety. Nevertheless, certain precautions need to be
observed when using training or electronical devices. Read and observe all instructions before
using this device.
ATTENTION
Disconnect the power supply after use and before any cleaning action to reduce the risk of
electric shock!
WARNING!
To reduce the risk of burns, fire, electric shock, errors and personal injury, observe the following
hints:
- Install the treadmill on an even, level surface with access to grounded outlet.
- DO NOT USE AN EXTENSION CABLE OR POWER STRIPS. DO NOT AMEND THE DEVICE
AND DO NOT USE ANY PARTS NOT RECOMMENDED BY THE MANUFACTURER!
- Never leave the device unattended.
- To ensure safety, the equipment should have at least 2 meters of free space all around it. Do not
place any sharp objects around the machine.
- Do not operate under a blanket or pillow. This may lead to overheating.
- Close supervision is necessary when this appliance is used by, on, or near children or disabled
persons.
- Use this appliance only for its intended use as described in this manual. Do not use any parts
not recommended by the manufacturer!
- Never operate this appliance if the cord or plug is damaged, if it is not working properly, if it has
been dropped or damaged or dropped into water. Return the appliance to a service center for
examination and repair.
- Do not carry this appliance by the cord or use the cord as a handle.
- Keep the cord away from heated surfaces.
- Never operate the appliance with blocked ventilation slots. Keep the air openings free of lint,
hair, dust etc.
- Never insert objects or parts of the body (fingers etc.) into any opening.
- Do not use the device outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
- Connect this appliance to a properly grounded outlet only. Pay attention, that the device is not
connected to the mains, until it is completely set-up.