21
3.5.2 Function „parc“
It is possible to parc the unused
frequencies out of the frequency
range from 950 up to 2150 MHz,
for avoiding interferences.
By programming, the display shows
after the frequency 2150 MHz the word
parc
. After confirmation with the
OK
-
Button, the channel will be out of the
frequency range of 950 to 2150 MHz.
3.6 Functions of the
service menu
3.6.1 Programming code lock
When in Standby mode (•), push the
buttons
OK
and
+
at the same time until
the dot disappears. While continuously
holding both buttons, press the button
–
3 times. After releasing the buttons,
the display shows
CoFF
. Choose
between
Code on
or
Code oFF
by
pressing the buttons
+/–
. Save your
settings by pressing button
OK
.
Afterwards the unit automatically
jumps into the Standby mode.
After activation of the programme
code lock (
Con
), the unit displays
Code
when any button or button
combination is pressed (except when
the code-combination is pressed).
3.6.2 Restoration of basic setting
When in Standby mode (•), push the
buttons
OK
, + and
–
at the same time
until the dot disappears. After you
have released the buttons, the display
shows
rSt
. The start of test routine is
acknowledged by pressing the
OK
button.
Now the functions of the OKB 1000
are checked and the factory set pre-
programmed settings are be restored. The
routine is finished when End is displayed.
Hereafter, the unit automatically
jumps back to the Standby mode.
