19
3.3 Programming
procedure Automode
LNB-offset (see section 3.4.1)
Tuning LNB-offset from -5 to +5 MHz
The channel to be programmed
is shown
(Channel 1 = CH01, Channel 5 = CH05)
Input frequency
Select satellite-IF-input frequency
Input frequency from 950 to 2150 MHz
Select digital or analogue channel
(automatic selection of the
channel separations)
The starting frequency is entered only at
programming of channel 1.
The further channels are arranged after
each other under consideration of the
channel separations after start frequency.
The output frequency is only
shown, it cannot be changed.
Output frequency 950 to 2150 MHz,
specified range 1015 to 2150 MHz
The device automatically switches
after 1.5 minutes on standby.
OK
OK
+
–
OK
+
OK
OK
OK
OK
OK
next channel
+
+
–
–
OK
–
+
OK
1
