Fume hoods
Soldering - Desoldering
Specialized tools for wiring and tinning
Hand tools, consumables and workshop equipment
–
+33(0)1 40 86 00 09
–
2
1. PRODUCTS COVERED BY THE LEAFLET
Visor hood
REF HI1P
Built-in hood
REF HI2P
Suitcase hood
REF HI3P
Multioperator hood*
REF HI4P
Fume cabinet
REF HI5VP
REF HI5VPP
REF HI5VPC
REF HI6VP
REF HI7VP
REF HI7VPR
Suspended hood
REF HI9P
* Two options available :
REF HI4P4S : 4 inlets Ø 75 mm
REF HI4P6S : 6 inlets Ø 50 mm
2. TECHNICAL DESCRIPTION
Main features of products
Dimensions
L x w x d
Power W
Lighting
Air flow m3/h
(without filter)
Weight kg
Dba
1 m from
hood at max
spped
430 x 350 x 200
80
*
*
72 for HI2P & HI4P
YES
*
*
excluding HI2P & HI4P
50-450
3,7
60
It is possible to obtain a reinforced flow unit. Power 100 W, air flow 50-600 m3 / h
All hoods are powered by single-phase alternating grounded current 230 V 50 hz and low voltage supply 24
VDC for the motor.
The body of the hood is made of polypropylene, with good resistance to alkaline chemicals. The operating
temperature limits are -20 ° to + 65 ° C (bending temperature under a load of 0.46N / mm²).
In the upper part of the body, completely isolated from the suction circuit, the electrical control of the suction
fan motor and the lighting system are installed.
The modulation of the rotational speed of the motor of the ventilator, ensured by an electronic variator is
obtained by the manual control of a button located on the front face of the hood.
Purification of the sucked air is ensured by the installation of a filtering body.
Choice of filtering material:
The filtering material will be determined according to the use of the extraction hood, as well as depending on the
nature of the pollutants. In order to preserve the cleanliness of the working atmosphere, it is better to aim at the
elimination of the air sucked by the hood to the outside.