FTE MODIG HD, Руководство пользователя

Страница: 35 / 100

User manual – MODIG HD
Technical changes and mistakes reserve
6
MODIG HD Version en_1.4 Fte maximal
3 Operations and Management
MODIG HD is controlled and managed through the key board and LCD display.
LCD Display – It presents the selected menu and the parameter settings. The backlight in the display is
on when the power is applied.
LED – These lights indicate the working status
z
Power: It lights on when the power supply is connected.
z
Alarm: It lights on when the there is error, such as the signal source loss.
z
Lock: It lights on when the signal source connected and goes off when the signal lose.
Left/Right/Up/Down buttons – Use these buttons to turn the screen pages, shift the target items by
moving the triangle, or change the parameter settings in the program mode.
Enter – Use this button to enter a submenu or save a new setting after adjustment; press it to start
adjusting the value of certain items with Up/Down buttons when the corresponding underline flash;
Press it to activate the hidden selections and change the setting with Up/Down (or Left/ Right) buttons.
Menu – Press this button to step back
Lock – Locking the screen / cancelling the lock state, and entering the main menu after the
initialization of the device. After pressing lock key, the system will question the users to save present
setting or not. If not, the LCD will display the current configuration state.
When the power is connected, the LCD will start to initialize the program. The LCD menu goes as
below chart.