background image

User’s manual · TSF 310 

 

         

- 13 -                 TSF  310                  version_en_1.1                FTE maximal 

 

- Add Services 

 

 

 

 

 

1. Select the option “Add services” 
through Up/Down buttons. Press OK 
to continue.  

2. Select one of the transponder 
services you want to add, through 
Left/Right keys and select the “+Add” 
button to include the service in the 
multiplex 

3. A window will appear and it will let 
you know that the operation made has 
been correct. 

 

- Delete Services 

 

 

 

 

 

1. Select the option “Delete services” 
through Up/Down buttons. Press OK 
to continue.  

2. Select the service you want to 
delete with the Left/Right keys. Then 
press OK over “-Rem” in order to 
remove it, or press OK over “--All” in 
order to delete all the services of the 
multiplex. 

3. A window will appear and it will let 
you know that the operation made has 
been correct. 

 
 

Note: It is not recommended to exceed the 85% of the maximum capacity of the multiplex due to the possible 
variability of the bits rate of the inputs services. 
 

 
- Date / Hour: Setting of the date and time of transmodulator. It is appropriate to maintain these parameters set in order to 
have the registration of errors linked to the current time and date.  
- SW version info: It allows you to visualize the basic information of the module: model, firmware version, etc. 
- Global Update: It allows carrying out the update of all the modules that are interconnected at the same time. 
- LCN: The LNC function allows assigning automatically a predetermined position 
to each one of the services of the multiplex. This function will allow the users who 
have a receiver with LNC support to make the ordination of channels 
automatically. 
Select a channel through Left/Right buttons and introduce the position. Press the 
“OK” button and the cursor will be placed over the number. With the keys of the 
cursor, we can move through all the digits and change the values. Press “OK” in 
order to save the changes 
 
 
 
 

Note:  If in the existing installation there are already services that have LNC system, you will have to configure 
the position of the module services in order to avoid conflicts with other net services. 
 

 
 
 
 
 
 
 
 
 

  TSF 310 
 
Operation finish

 

 

  TSF 310 
Input          083 % 
PID:06000 Das Erste 
-Rem     --All 

  TSF 310 
BW usage        083% 
>Delete services 
 Add services 

  TSF 310 
 
Operation finish

 

  TSF 310 
Input          035 % 
PID:06200 arte HD 
+Add 

  TSF 310 
BW usage        000% 
 Delete services 
>Add services 

  TSF 310 
 
LCN:00004 arte HD

 

 

Содержание TSF 310





















Отзывы: