FTE Maximal TSF 310, Руководство пользователя

Страница: 12 / 20

User’s manual · TSF 310
- 10 - TSF 310 version_en_1.1 FTE maximal
- Services:
- Change service name: It allows changing the name of the
service manually. In order to do so, please choose the service in
the first line and then write the new name in the second line.
Then you have to press “modify” in order to save the changes.
Next it is attached the identification table (NID/ONID) of the main satellites. You
will be able to find more information in the law ETSI TR 101 162 v1.2.1.
Satellite Net ID Original Net ID Description
Hotbird 13ºE (Eutelsat 13ºE) 318 318 Eutelsat 13ºE System
Astra 19.2ºE 1 1 Astra Satellite Network 19,2ºE
Astra 23ºE 3-25 3-25 Astra n (n=1-23)
Astra 28,2ºE 2 2 Astra Satellite Network 28,2ºE
Nilesat 7ºW 2048 2048 Nilesat 101
Hispasat 30ºW 33 33 Hispasat Network 1
PRO 201
Note: From PRO 201 programmer you can only carry out the programming of a single module, in order to carry
out the programming of several modules at the same time you have to use a mediaMAX EVO or mediaMAX
MINI series field strength meter.
When you connect the PRO 201 programmer, it will proceed to recognize the
module and to show the main menu.
In the main menu are shown the different options for configuring the
transmodulator.
We have to use the “Up” and “Down” buttons of the keyboard in order to move to
the different options, and to get into the submenus we have to press “OK” button.
1. Manual
Inside the “manual” menu there are specified the different options for
setting up the input, output and modulation parameters.
1. This field shows the type of parameter that is selected at the moment.
Options: Input Sat, Out Terr, Out TV.
2. This field shows the parameter that is selected. In order to move
around the different options we have to use the “Up” and “Down” buttons
of the keyboard..
Click on OK to edit the selected parameter and
Right/Left for changing it. Once it is configured press
OK
.
Satellite input ( Input Sat)
In these options you will be able to configure the input parameters of the satellite
signal:
- L.O. freq (Local oscillator): Selection of the local oscillator that you wish to use:
FI, KU, C, K9750, K10000, K10600, K10700, K10750, K11250, K11300,
K11325 .
TSF 310 *Input Sat
RF level: 013
>LO Freq: LO KU
Freq: 11509
1
2
TSF 310
>Manual< Config
Auto
TSF 310 *Input Sat
Symbol Rate: 27500
>Antenna: 13V+22k
Diseqc: NONE