![FTE Maximal MAX IP90 Скачать руководство пользователя страница 23](http://html.mh-extra.com/html/fte-maximal/max-ip90/max-ip90_user-manual_2341224023.webp)
User’s manual · MAX IP90
Technical changes and mistakes reserve
-
23
-
MAX IP90 Version en_1.0
FTE Maximal
8. Installation
Over this menu you can search for new channels
Channel Search
,
modify the frequency list
MUX Management
, or make backups.
8.1. Channel
Search
The receiver will carry out a search for channels broadcasted by other
equipment connected to the network.
You can receive transmissions of other equipment in mode
Unicast
and
Multicast
.
- Unicast
is when the information is sent from a unique sender to a
unique receiver.
- Multicast
in when the information is sent through a network to
multiple destinations simultaneously. The equipment that work in
multicast mode send the information into an IP range between
224.0.0.0 and 239.255.255.255.
In
Search Type
select
Auto
to search for all the channels which are
broadcasted by other equipment in your network in multicast mode. If you
select the
Host
option, it will look for transmissions of the equipment present
in the list
Network Management
that you select.
In the field
Multiplex
you should select the hosts from the list Network
Management in which you with to search for channels.
Pressing the
Blue
button or
a new window will appear, where you can
select the hosts.
You can move the cursor with
.
With the
Green
button you select the hosts.
Press
Exit
to go back to the search menu.
If you press the
Green
button, it will carry out a search of the video IP
channels.
Press
Exit
to exit.
8.2. Network
Configuration
The receiver will require the introduction of the needed parameters to be able
to get connected to a network, as well as to be visible to other equipments so
that receive streaming of video and audio.
You should introduce the following parameters:
IP Address
Number of 32 bits expressed in 4 numbers between
0 and 255 which identifies the receiver inside its
network.
Every device in the network should have a different
IP Address and it is highly recommended that all of
them are in the same subnetwork and with IP
addresses into the following range:
10.x.x.x
172.16.0.0 – 172.31.255.255
192.168.x.x