FTE Maximal MAX IP90 Скачать руководство пользователя страница 21

Страница: 21 / 25

User’s manual · MAX IP90

Technical changes and mistakes reserve

MAX IP90 Version en_1.0

FTE Maximal

Do not forget to change also the code on the remote control.

For this, you have to change the position of a switch in the remote control.

You have to select the same position in the receiver than in the remote
control.

Info bar delay

Here you can select how long the information of the OSD will be displayed
on the screen.
Selection:

10 sec.

Please change it with the buttons

Number of Sequential Channel

Selecting

Yes

in this option, the positions of the channels will be occupied continuously and sequentially. Although you

move the position of one channel, you will shift the positions to avoid leaving empty channels.

Selecting

, you can leave empty channels if we shift the position of one channel.

6.7. Version

Here you get information about the hard and software from your receiver.

Manufacturer

Manufacturer of the receiver.

Model

Exact article name.

Hardware

Revisions number from main PCB

Loader

Version for boot loader

Software

Version for installed software

Not available in this model

Guarantee

Beginning of the warranty time

CRC

Checksum of the EEprom

6.8. Factory

Default

With this option you can restore the receiver totally to the status when
the receiver was used the first time.

Caution: Make this only if you are 100% sure, this step can
is irreversible.

6.9. Software

Upgrade

With this menu you can transfer data and install new software.

With the buttons

you can choose between the following

possibilities.

Serial port (Download)

Start data download via RS-232 connection.

Air (now)

Starts data download via OTA immediately

Air (programmed)

Starts data download via OTA at a programmed time

Содержание MAX IP90


























Результаты поиска

Содержание MAX IP90

Отзывы:

Бренды по названию

Популярные бренды

FTE Maximal MAX IP90, Руководство пользователя

Результаты поиска

Содержание MAX IP90

Отзывы:

Бренды по названию

Популярные бренды