User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve
-
13
-
I-PVR ST192 CI HDMI Version en_1.0
FTE Maximal
IP LAN Soft:
IP address of the PC where the application for exchanging video streamings between the
PC and the receiver is installed.
If you want, you can download the application
IP LAN Soft
from the Website:
www.ftemaximal.com
MAC
Device address at hardware level. It is unique in each device and it comes from the factory.
You can move through the menus with the buttons
and
.
With the
Red
button you delete the last character.
Press
OK
to save the changes.
Streaming Configuration
This receiver can send streaming to other equipment connected to the
network.
You can send video streamings in
Unicast
and
Multicast
modes.
- Unicast
is when the information is sent from a unique sender to a
unique receiver.
- Multicast
in when the information is sent through a network to
multiple destinations simultaneously. The equipment that work in
multicast mode send the information into an IP range between
224.0.0.0 and 239.255.255.255.
This receiver can only send terrestrial channels streams
In this window you can configure the network parameters of the device at destination:
Streaming
You should select
On
so that the receiver sends the streaming.
Address
IP Address of the destination device.
You can simultaneously send the streaming to different devices in case that in this
field a multicast IP address is introduced.
Destination port
Communications port where the information is sent.
The port must be a pair number into the range between 1024 – 65534.
Streaming protocol
You can select the communications protocol. Options:
UDP
or
RTP
.
Current Channel
It allow you to fix the number of transponder that is going to be sent to the destination receiver.
No
: Always will be sent to the receiver at destination the indicated cannel in the field
Channel
,
and the origin receiver only will be able to see any cannel belonging to the same transponder
which is indicated in the
Channel
field, or IP channels.
When you see an IP channel, the streaming sending process will stop.
Yes
: the receiver will send the channel which is tuned locally. Every time you
change the channel in the receiver, you must tune the same in the destination
receiver.
Channel:
Service to be sent. Only available when you select
No
in the field
Current Channel
.
You can move through the menu with the buttons
and
.
With the
Red
button you delete the last character.
Press
OK
to save the changes.
