User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve
-
10
-
I-PVR ST192 CI HDMI Version en_1.0
FTE Maximal
Menu Language:
Here you have to select the language for the Receiver menu and information.
Select the language with the arrow buttons
and press the
OK
button.
Time Zone:
In order to the receiver is able to display the correct time and adjust the timer
recordings correctly, it is needed to fix the time zone to the place you live.
Select here the time delay according to your position comparing to
Greenwich Time.
In UK:
Summer time: +1 hours
Winter
time:
GMT
hour
Select with the arrow buttons
and press the
OK
button.
Selection of the satellite list of channels pre-loaded
This option allows loading the channel list stored in your receiver, and you
will not need to tune channels. The list includes Astra / Hot Bird / Hispasat
/ Turksat channels, and it is supposed that the same input signal is
available in both inputs.
If you select
Load Channel List
, the installation assistant finishes at this
point and it begins the viewing of the channels.
In case of having a different configuration, please select
Tune new
channels
and continue with the installation assistant, configuring the antennas.
Antenna configuration:
In this menu, you should configure the connected signals in the
IF IN
of
your receiver.
By default, the equipment comes with the configuration that you can see in
the Picture, with four satellites.
The available options in this screen allow:
Red
Button: Deletes the selected satellite. It asks for confirmation.
Green
Button: Edits the selected satellite. The options appear at the image
below.
Yellow
Button: Adds a satellite. The options appear at the below image.
