background image

 

 

                                     

            

                                                   

© FTEmaximal 

 

 

 

 

Important notes for your safety 

 

 

Important Notes 

 

The antenna must be installed according to the instructions manual and taking 
all necessary cautions.  
If these conditions are not followed the manufacturers warranty will be limited or 
void.   
Please take all necessary safety steps when working with equipment that is 
connected to an electric power source.  
Please take care of yourself and the people around you. 
 
Is it necessary to read the complete manual? 

                                                        – Yes, we recommend it. 

 
For your Safety 

 

Caution:

  

Do not open the housing: you may get an electric shock. 
 
- Equipment must be repaired by a professional.  
 
- No components require to be adjusted inside the antenna.  
 
- When you clean the equipment, first disconnect it from the power source. 
 
Never pull on the cable of the power supply. Try to pull the plug directly, 
otherwise the cable will be damaged. Be sure that it is well connected, because 
if not it has the potential to start a fire. 
 

 

A professional must repair defects like this quickly. 

 

Never install this equipment during a storm. 
Any TV equipment should be unplugged during a it.   
It is possible that a thunderbold can pass through the antenna cable and the 
metal parts of the unit and cause an electric shock. 
 

Use the amplifier only in a dry and well-ventilated environment. 

 
The build up of dust inside the unit can cause that it stop to work correctly. 
The danger is specially high if any fluids enter into this equipment. 

Содержание AV 14N












Отзывы: