background image

 

17

Limited Warranty 

 
The DV-HXT-1 is warranted against failures due to defective parts or faulty workmanship for a 
period of three years after delivery to the original owner. During this period, FSR will make any 
necessary repairs or replace the unit without charge for parts or labor. Shipping charges to the 
factory or repair station must be prepaid by the owner, return-shipping charges (via UPS Ground) 
will be paid by FSR. 
 
This warranty applies only to the original owner and is not transferable. In addition, it does not apply 
to repairs done by other than the FSR factory or Authorized Repair Stations. 
 
This warranty shall be cancelable by FSR at its sole discretion if the unit has been subjected to 
physical abuse or has been modified in any way without written authorization from FSR. FSR’s 
liability under this warranty is limited to repair or replacement of the defective unit. 
 
FSR will not be responsible for incidental or consequential damages resulting from the use or 
misuse of its products. Some states do not allow the exclusion of incidental or consequential 
damages, so the above limitations may not apply to you. This warranty gives you specific legal 
rights, and you may also have other rights which vary from state to state. 
 
Warranty claims should be accompanied by a copy of the original purchase invoice showing the 
purchase date (if a Warranty Registration Card was mailed in at the time of purchase, this is not 
necessary). Before returning any equipment for repair, please read the important information on 
service below. 
 
 

SERVICE

 

 
Before returning any equipment for repair, please be sure that it is adequately packed and 
cushioned against damage in shipment, and that it is insured. We suggest that you save the original 
packaging and use it to ship the product for servicing. Also, please enclose a note giving your name, 
address, phone number and a description of the problem. 
 

NOTE: all equipment being returned for repair must have a Return authorization (RMA) 

Number. To get a RMA Number, please call the FSR Service Department (1-800-332-FSR1). 

Please display your RMA Number prominently on the front of all packages.

 

 

CONTACT INFORMATION 

 

244 Bergen Blvd. 

Woodland Park, NJ 07424 

 

Phone

:  (973) 785-4347  

 

*

Order Desk Fax

: (973) 785-4207  

 

E-mail:  

[email protected]

 

 

Web Site: 

http://www.fsrinc.com

 

 

 
 

Содержание DV-HXT-1 HDMI



















Отзывы: